Home: PAINT


  • ET-3G Epoxy Anchoring Adhesive w/ Nozzle, 22 oz.

  • SIMPSON STRONG TIE
  • 39.09 ea.

  • Related Items

  • ET3G22-N
    234790
    707392023470
    0
    0
  •  
  • ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and un-cracked) and masonry (cracked and un-cracked). ET-3G has a long working time, 50 min at 70 degrees F, and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50 degrees F to 110 degrees F. Simpson Strong-Tie epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and un-cracked concrete applications.
    ET-3G™ is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). et-3g has a long working time: 50 min at 70 f (21 c) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50 f (10 c) to 110 f (43 c). Simpson strong-tie epoxy anchors for concrete and masonry are rigorously tested to meet ibc requirements, including for both cracked and uncracked concrete applications.
    • Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas
    • Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
    • Design flexibility — improved sustained load performance at elevated temperature
    • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from –40 F (–40 C) to 176 F (80 C)
    • Manufactured in the USA using global materials
    • 22-oz. side-by-side cartridge
    • Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
    • Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair SET-3G adhesive performance
    • (1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge
    US
    10.50
    4.13
    2.25
    10.50
    8.25
    11.00
    False
    GroundAndAir
    WarningWARNING:
    This product contains chemicals like Bisphenol-A and Epichlorohydrin which are listed by the State of California as known to cause Reproductive harm. www.P65Warnings.ca.gov

Terms and Conditions |  Privacy Policy |  Site Map
628 Main Ave S, Twin Falls, ID 83301